SAE1045 1035 CK45 S45C A105 Hot forging/forged steel bar
SAE 1045 forged steel
What is SAE 1045 Forged steel?
SAE 1045 is an American grade of forged steel, also known as carbon structural steel. SAE 1045 has good wear resistance and machinability, and the tensile strength of SAE 1045 forged steel is 570-700 mpa.
What is SAE 1045 forged steel used for?
SAE 1045 Forged steel exhibits medium tensile strength, good weldability and machinability, and high strength. Typically used in machinery parts, die forging, hot upsetting, gears, crankshafts, shafts, axles, bolts, studs, pinions, casters, and support plates.
SAE 1035 Forged steel
What is SAE 1035 Forged steel?
SAE 1035 / AISI 1035 is a water-resistant carbon steel with a small amount of chromium added, which is characterized by good wear resistance and hardenability. SAE 1035 / AISI 1035 carbon steel, where carbon is the key alloying element, also contains 0.4% silicon and 1.2% manganese.
What is SAE 1035 Forged steel used for?
Typical applications for SAE 1035 Forged steel include small parts such as screws, studs, bolts, nuts and other fasteners.
CK45 Steel Bright bar
What is CK45 steel bright bar?
CK45 steel bright bar, with an average carbon content of 0.45%, is classified as medium carbon steel, which is one of the most widely used non-alloy carbon steels in German standards.
What is CK45 steel bright bar used for?
This is because CK45 has good creep performance at 480℃ and the lowest application temperature is -25℃. Therefore, CK45 steel rods are commonly used in automobile manufacturing and mechanical engineering, as well as in complex shaped parts, such as hub, ship shaft, transmission parts, etc.
S45C Forged steel
What is S45C Forged steel?
Forged steel S45C Forged steel is forged by electric furnace, open furnace or pure oxygen converter process. Forged steel S45C Forged steel has uniform microstructure and no defects.
Forged steel S45C Forged steel has carbon content of more than 0.4%, good abrasion resistance, but reduced malleability and easy deformation and cracking during quenching, so heat treatment is extremely important, and must be cooled quickly after tempering to avoid tempering brittleness. Spheroidal treatment for S45C Forged steel can improve the machinability of this type of carbon steel.
What is S45C steel bright bar used for?
Forged steel S45C Forged steel is widely used in machinery manufacturing, and its mechanical properties are very good. But this is a medium carbon steel, Forged steel is not well quenched, S45C Forged steel can be hardened to HRC42~46. Therefore, if surface hardness is needed and S45C Forged steel’s superior mechanical properties are needed, S45C Forged steel is often carburized and hardened, so that the required surface hardness can be obtained.
A105 Steel bright
What is A105 steel bright?
A105 is ASTM Standard number, where A stands for ordinary carbon structural steel. A105 is a forged carbon steel. A105 is also a material code, belongs to special steel, is a kind of cold forging steel. The A105 Steel bright is a mild steel forging similar to 20 Steel. Its standard has two, one is the United States standard. The mechanical properties are between 20 forged steel and 16Mn forged steel.
What is A105 steel bright bar used for?
A105 Steel bright has many main uses and a large amount of use. It is suitable for railway, highway, bridge and all kinds of engineering buildings. It also produces a variety of metal structures bearing static loads and unimportant mechanical parts and general welds without heat treatment process.
SAE 1045 forged steel/SAE 1035 Forged steel/CK45 Steel Bright bar/S45C Forged steel/A105 Forged steel delivery
Similar grade in different standard | SAE1045/S45C/CK45/1035/S35C/A105/1215/12L14 forged steel |
Available sizes | Forged steel round bar:200mm-800mm
Forged steel square:block200mm*200mm-500mm*500mm Forged steel flat block (150mm-500mm)*(200mm-500mm) Forged Shaft:according to client’s drawing,we also can supply drawing according to client’s requirement |
Production Process | EAF+LF+VD ( necessary) +forged+UT+ rough machined(optional) +UT+ Heat Treatment (optional)+UT+Precision machining |
Delivery condition | Forged+black surface
Forged+rough machined Forged+rough turned+QT/annealed/normalized |
Heat treatment: | Normalized / Annealed / Quenched / tempered (optional) |
Applications | Statically and dynamically stressed components for vehicles, engines and machines. For parts of larger cross-sections, crankshafts, gears.
|
Inspection | Spectral Tested, Microstructure Tested,Hardness Test,Macrostructure Test,100% UT test according to :SEP1921-84,GR.3 CLASS C/c or D/d |
Packing situation | standard seaworthy packing or as customer required |
Delivery time | 7days for stock,30days for new material |
Payment term | T/T or L/C |
Our mill’s certificates | ISO901&ISO.TS16949,ISO4001,OHSAS18001
Special Equipment Manufacturing License of P.R.C for pipeline plate,steel plate for boiler&Vessel; ISO/TS16949 2009;Europe CE Mark Certificate;JIS MARK,KS MARK. |
Our advantage
● Computer-Aided Design (CAD) System
● Multiple Wire EDM (Electric Discharge Machining) Machines
● Plunge EDM (Solid Electrode Electric Discharge Machining)
● Complete Manufacturing of Carbide Dies
● Contoured Straightener Rolls
● Profile Shape Shear Knives
● Fast Tooling Changes and Modifications
● An Advanced Quality Planning System Used for Prototyping
● 1045 forged crankshaft,1045 forged crank,1045 forged clothing,1045 forged steel,1045 forged steel bar,1045 forged steel properties,forged 1045.hand forged 1045 surgical steel,sae 1045 forged,sae 1045 forged steel